Owner`s manual

4. If the blade is not 90° to the

fence, unscrew the fence

locking knobs completely

out and remove the fence

extensions.

5. Loosen all hex-head bolts

(Fig.4a). Rotate the fence until

the protractor is ﬂush over its

entire length. Retighten the hex-

head bolts. Remount the fence

extensions.

NOTE: If the saw has not been

used recently, recheck blade squareness to the fence and readjust if

necessary.

MITER ANGLE INDICATOR ADJUSTMENT (Fig. 5) If Necessary

WARNING: Failure to unplug your saw could result in accidental starting

causing serious injury.

1. Place the miter table at the zero

position, making sure the miter

lock is secured in position.

2. Loosen the miter-angle indicator

screw and adjust the indicator to

the “0” mark on the miter scale

(Fig.5).

3. Tighten the miter angle indicator

screw.

Fig. 4a

Fig. 5

Hex-head bolts