Owner`s manual

WARNING: Always wear safety goggles or safety glasses with side

shields during power tool operations, or when blowing dust. If operation is

dusty, also wear a dust mask.

ROUTINE MAINTENANCE

WARNING: DO NOT at any time let brake ﬂuid, gasoline, petroleum-based

products, penetrating oils, etc. come in contact with plastic parts. Chemicals

can damage, weaken or destroy plastic, which may result in serious per-

sonal injury.

Periodic maintenance allows for long life and trouble-free operation. A

cleaning, lubrication and maintenance schedule should be maintained. As a

common preventive maintenance practice, follow these recommended steps:

1. When work has been completed, clean the tool to allow smooth

functioning of the tool over time.

2. Use clean damp cloths to wipe the tool.

3. Check the state of all electrical cables.

4. Keep the motor air openings free from oil, grease and sawdust or

woodchips and store tool in a dry place.

5. Be certain that all moving parts are well lubricated, particularly after

lengthy exposure to damp and/or dirty conditions.

CHANGING THE BLADE (Fig. 21)

Fig. 21

Outer Flange

Inner Flange

Arbor Screw

Guark

Arbor Lock Button

Arbor

Screw

Blade