Owner`s manual

5
20. DIRECTION OF FEED. Feed work into a blade or cutter against the
direction of rotation of the blade or cutter only.
21. NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t
leave tool until it comes to a complete stop.
DOUBLE-INSULATED TOOLS
1. Replacement Parts
When servicing use only identical replacement parts.
2. Polarized Plugs
To reduce the risk of electric shock, this equipment has a polarized plug
(one blade is wider than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way.
ELECTRICAL SAFETY
WARNING: Do not permit fingers to touch the terminal or plug when in-
stalling or removing the plug from an outlet.
 To reduce the risk of electric shock, Double insulated tools are equipped
with a polarized plug (one blade
is wider than the other). This
plug will fit in a polarized outlet
only one way. If the plug does not
fit fully in the outlet, reverse the
plug. If it still does not fit, contact
a qualified electrician to install a
polarized outlet. Do not change
the plug in any way.
 Double insulation eliminates the
need for the three-wire grounded
power cord and grounded power
supply system. Applicable only
to Class II (double-insulated) tools. This compound miter saw is a double
insulated tool.
WARNING: Double insulation DOES NOT take the place of normal safety
precautions when operating this tool.
 BEFORE plugging in the tool, BE SURE that the outlet voltage supplied is
within the voltage marked on the tool’s data plate. DO NOT use “AC only”
rated tools with a DC power supply.
Cover of Grounded
Outlet Box