Owner`s manual

WARNING: The use of optical instruments such as, but not limited to, tele-

scopes or transits to view the laser beam will increase eye hazard.

1. The laser shall be used and maintained in accordance with the

manufacture’s instruction.

2. Never aim the beam at any person or an object other than the work piece.

3. Always ensure the laser beam is aimed at a sturdy work piece without

reﬂective surface. I.e. wood or rough coated surface are acceptable.

Bright shiny reﬂective sheet or the like is not suitable for laser use as the

reﬂective surface could direct the beam back at the operator.

4. Do not attempt to activate the laser when the tool housing is removed.

5. The laser is activated by means a button switch independent with the main

switch of the saw.

6. Do not change the laser light assembly with a different type. Any repairs

must only be carried out by the laser manufacture or authorized service

agent.

7. Do not attempt to repairs the laser guide by yourself.

8. Do not attempt to change any parts of the laser guide.

SPECIFIC SAFETY RULES FOR MITER Saw

1. ALWAYS wear eye protection.

2. DO NOT operate saw without guards in place.

3. BE SURE turn off tool and wait for saw blade to stop before moving

workpiece or changing settings.

4. BE SURE disconnecting power before changing blade or servicing.

5. DO NOT expose to rain or use in damp location.

6. WHEN SERVICING, use only identical replacement parts.

7. ALWAYS ﬁrmly clamp or bolt your miter saw to a secure, stable

workbench or table at approximately hip height.

8. BE SURE that all adjustments are secure BEFORE making a cut.

9. ALWAYS make sure that the miter table and saw arm (bevel function) are

locked in position BEFORE operating your saw. Lock the miter table by

securely tightening the miter lock lever. Lock the saw arm (bevel function)

by securely tightening the bevel lock knob.

10. BE SURE that the blade path is free of nails. ALWAYS carefully inspect

lumber and remove all nails BEFORE cutting.