80V BRUSHLESS BACKPACK BLOWER 267-3104 2400594ME BLB484 OPERATOR’S MANUAL CAUTION To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
TABLE OF CONTENTS Safety Symbols............................................................................................................ Page 2 Safety Instructions....................................................................................................... Page 3 Overview...................................................................................................................... Page 6 Specifications......................................................................................
SAFETY SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract our attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not by themselves eliminate any danger. The instructions and warnings they give are no substitutes for propper accident prevention measures.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING (THIS POWER TOOL) WARNING Read and understand all instructions before using this product. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. When using an electrical appliance, basic precautions should always be followed, including the following: • Do not use on wet surfaces. • Do not charge the unit outdoors. • For household use.
SAFETY INSTRUCTIONS manufacturer to recharge. • Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. • Prevent unintentional star ting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance. Carry the power tool with your finger on the switch or energize power tool that have the switch on invites accidents.
OVERVIEW FIG. 1 Turbo Button Trigger Cruise Control Lever Harness Blower Tube SPECIFICATIONS Type Cordless, battery operated Motor 80V Brushless Air Volume 580 CFM Air Speed 145 MPH Weight (Without Battery) 8.4 lbs. (3.
ASSEMBLY UNPACKING This product requires assembly. • Carefully remove the product and any accessories from the box. Make sure that all items listed in the package contents section are included. • Inspect the product carefully to make sure no breakage or damage occurred during shipping. • Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. • If any parts are damaged or missing, please call 1-844-MSTR4CE (844-678-7423) for assistance.
ASSEMBLY FRONT BLOWER TUBE 1. Align the grooves on the front blower tube with the tabs on the rear blower tube. 2. Install the front blower tube onto the rear blower tube until the tabs engage the grooves. 3. Turn the front blower tube in the direction of the arrow until the tabs lock into position. To remove the battery pack 1. Press and hold the battery release button with firm grip. 2. Grasp the trigger handle firmly. Pull the battery pack out of the handle. FIG. 6 FIG.
OPERATION ADJUST THE HARNESS A well adjusted backpack blower and harness makes work easier. Adjust the harness to give you the best working stance. Adjust the side straps so the weight is equally distributed across your shoulders. FIG. 7 FIG. 9 5 6 1 2 3. Close and lock the quick-release fastener by pushing it together. 4. Squeeze the hooks to open the quickrelease fastener. FIG. 10 1. Once the blower is properly fitted on your back, pull the ends of the straps downward to tighten the harness.
OPERATION START / STOP THE BLOWER FIG. 12 Before start-up, make sure that the blower is in perfect condition to guarantee safe operation. Turbo button Cruise control lever 1. Squeeze the switch trigger to start. 2. To change speed, press or release trigger by degrees to increase or decrease the speed. FIG. 11 OPERATION TIPS Trigger CRUISE CONTROL LEVER This blower is equipped with a cruise control function. Please read and understand the function of the cruise control lever. 1.
MAINTENANCE CLEAN THE MACHINE • Clear the unwanted material out of the air vent with a vacuum cleaner. • Do not spray the air vent or put the air vent in solvents. • Clean the housing and the plastic components with a moist and soft cloth. CAUTION Do not let brake fluids, gasoline, petroleum-based materials touch the plastic parts. Chemicals can cause damage to the plastic, and make the plastic unserviceable. STORE THE MACHINE • Clean the machine before storage.
EXPLOPDED VIEW No. Part No.
NOTES Page 13
80V BRUSHLESS BACKPACK BLOWER WARRANTY 4-YEAR LIMITED WARRANTY This MASTERFORCE™ brand power tool carries our famous No Hassle 4-Year Limited Warranty to the original purchaser. If, during normal use, this MASTERFORCE™ power tool breaks or fails due to a defect in material or workmanship within four (4) years from the date of original purchase, simply bring the tool with the original sales receipt back to your nearest MENARDS® retail store.
© 2019 Menard, Inc.
