Operator`s manual

Page 11
OPERATION
TRIGGER SWITCH (FIG. 2)
To turn the Impact Wrench ON, depress
the trigger switch. To turn it OFF,
release the trigger switch.
VARIABLE SPEED (FIG. 2)
The variable-speed trigger switch delivers
higher speed with increased trigger
pressure and lower speed with decreased
trigger pressure.
FIG. 2
Variable speed
trigger switch
Direction
of rotation
selector
DIRECTION-OF-ROTATION
SELECTOR (FORWARD/
CENTER-LOCK/REVERSE)
(FIG. 3)
The direction of rotation is reversible and is
controlled by a selector located above the
trigger switch. With the Impact Wrench held
in normal operating position:
Position the direction-of-rotation selector
to the right of the tool for reverse rotation.
Setting the switch in the OFF (center-lock)
position helps reduce the possibility of
accidental starting when not in use.
REVERSE
FORWARD
FIG. 3
NOTICE: To prevent gear damage, always
allow the Impact Wrench to come to a
complete stop before changing the
direction of rotation.
NOTICE: The Impact Wrench will not run
unless the direction of rotation selector is
engaged fully to the left or right.
LED WORKLIGHT (FIG. 4)
The LED worklight, located on the base of
the Impact Wrench, will illuminate when the
trigger switch is depressed. This provides
additional light on the surface of the
workpiece for operation in lower-light
areas. The LED worklight will turn off when
the trigger switch is released.
FIG. 4