Owner`s manual

2
TABLE OF CONTENTS
Specifications…………..…………………………………………... Page 2
Rules for Safe Operation……………..……………………………... Page 3
Know the Hammer Drill…………………………………………….. Page 7
Assembly and Adjustments………………………………………..... Page 9
Operating Instructions…..………………………………………....... Page 10
Maintenance……………………………………………………........ Page 12
Trouble Shooting…..……………………………………………........ Page 13
Warranty……………..…………………………………………........ Page 14
SPECIFICATIONS
Model: 241-0738
Motor: 120 V, 60 Hz, 7.5 A
Keyed chuck: 1/2” (13 mm)
Variable speed ranges: 0–1080 & 0–3000 RPM
Hammer: 0–18,000 & 0–48,000 BPM
Maximum drilling capacity: 1/2” in steel
1/2” in Concrete (3/16”-3/8” Optimum)
1 1/4” in Wood
Weight: 7 lb 8 oz (3.4 kg)
SAFETY SYMBOLS FOR YOUR TOOL
The label on your tool may include the following symbols
V
..............................................................
Volts
A
..............................................................
Amps
Hz
............................................................
Hertz
W
.............................................................
Watts
min
..........................................................
minutes
..........................................................
Alternating current
.........................................................
Direct current
n
o
..............................................................
No load speed
...........................................................
Class II construction,Double insulated
.../min
.....................................................
Revolutions or Strokes per minute
...........................................................
Indicates danger,warning or caution.
It means attention!Your safety is involved
..........................................................
Wet Conditions Alert! Do not expose to
rain or use in damp locations