Owner`s manual

10
Your hypoid circular saw has a precision-built electric motor and it should only
be connected to a 120-volt, 60-Hz AC ONLY power supply (normal household
current). DO NOT operate on direct current (DC). This large voltage drop will
cause a loss of power and the motor will overheat. If the saw does not operate
when plugged into correct 120-volt, 60-Hz AC ONLY outlet, check the power
supply. The saw has a 8-ft, 2-wire power cord (no adapter needed).
This Hypoid Circular Saw has the following features:
• 15 Amp, 4400 RPM (no-load speed) motor provides power and torque for
fast, sure cuts in wood, plywood, hardboard, and wood-base materials.
• Quick depth-of-cut adjustments with maximum depth of cut: 2-3/8-in. thick
at 90°; 1-11/16-in. thick at 45°
• Easy-to-read bevel-cut scale adjusts from 0° to 51° bevel capacity.
• Heavy duty, lightweight, magnesium upper and lower blade guards for
extra strength and durability.
• Extended-length trigger switch for maximum control and comfort.
• Aluminum base provides stability for maximum control during sawing
applications.
• Rear handle and front assist handle for positive gripping, control, balance,
and comfort.
• Includes 24-tooth, carbide-tipped steel, blade for fast, smooth cuts.
• Front-mounted spindle lock for easy blade changes.
• Built-in sawdust ejection chute helps direct dust and chips away from the
operator.
• Permanently lubricated ball bearings throughout for smooth operation and
long motor life.
• Durable, machined hypoid gearing for efficient power transmission.