Use And Care Manual

Page 9
ASSEMBLY
TO ATTACH BATTERY PACK
(FIG. 1)
1. Lock the trigger switch on the impact
driver by placing the direction-of-
rotation selector in the center position.
2. Align the ribs on the battery pack with
the grooves of the impact driver, and
then attach the battery pack to the
impact driver.
NOTICE: Make sure the latch on the
battery pack snaps into place and the
battery pack is secured to the impact
driver before operation.
FIG. 1
Detach
Release button
Attach
TO DETACH BATTERY PACK
(FIG. 1)
1. Lock the trigger switch on the impact
driver by placing the direction-of-
rotation selector in the center position.
2. Depress the battery release buttons
located on the both sides of the battery
pack to release the battery pack.
3. Pull the battery pack out and remove it
from the tool.
INSTALLING BITS (FIG. 2)
WARNING:
Disconnect battery
pack from tool before making any
assembly, adjustments or changing
accessories. Such preventive safety
measures reduce the risk of starting the
tool accidentally.
1. Lock the trigger switch on the impact
driver by placing the direction-of-
rotation selector in the center position.
2. Insert the bit into the chuck. You will
hear a “click” to indicate that the bit is
securely installed in place.
3. Pull the bit to check if it installed
securely.
FIG. 2