Use And Care Manual

Page 11
OPERATION
VARIABLE-SPEED TRIGGER
SWITCH (FIG. 6)
1. To turn the impact driver ON, press the
trigger switch.
2. To turn the impact driver OFF, release
the trigger switch.
3. The variable-speed trigger switch
delivers higher speed with increased
trigger pressure and lower speed with
decreased trigger pressure.
FIG. 6
Trigger switch
Direction-of-Rotation
Selector
ELECTRIC BRAKE
When the trigger switch is released, it
activates the electric brake to stop the
chuck quickly. This is especially useful in
the repetitive driving and removal of screws.
DIRECTION-OF-ROTATION SE-
LECTOR (FIG. 7)
The direction of bit rotation is reversible and
is controlled by a selector located above the
trigger switch. With the impact driver held in
normal operating position:
1. Position the direction-of-rotation
selector to the left of the tool for forward
rotation.
2. Position the direction-of-rotation
selector to the right of the tool for
reverse rotation.
3. Setting the direction-of-rotation selector
in the OFF (center-lock) position helps
reduce the possibility of accidental
starting when not in use.
NOTICE: To prevent gear and motor
damage, always allow the impact driver to
come to a complete stop before changing
the direction of rotation.
FIG. 7
Forward Reverse