Installation Instructions

Page 9
OPERATION
TO ATTACH BATTERY
PACK (FIG.1)
FIG. 1
1. Lock the trigger switch in the “off” position.
2. Align the raised portion on the battery
pack with the grooves on the saw, and
then attach the battery pack to the tool
as shown.
NOTICE: Make sure that the latch on the bat-
tery pack snaps into place and the battery
pack is secured to the tool before beginning
operation.
CAUTION:
When placing the battery
pack on the tool, be sure that the raised rib
on the battery pack aligns with the groove
on the saw and the latches snap into place
properly. Improper assembly of the battery
pack can cause damage to internal compo-
nents.
TO DETACH BATTERY
PACK (FIG. 1)
1. Lock the trigger switch in the “off” position.
2. Depress the battery release button
located on the battery pack to release
battery pack.
3. Pull the battery pack out and remove it
from the tool.
TRIGGER SWITCH (FIG. 2)
FIG. 2
1. To turn the tool ON, push the lock-off
button and depress the trigger switch.
2. To turn the tool OFF, release the
trigger switch.
INSTALLING A SAW
BLADE (FIG.3)
FIG. 3
WARNING:
To prevent personal
injury, always remove the battery pack
from the tool before installing or removing
the saw blade!