Product Manual

12
ACCESSORIES
1. Dust bag…………………………………………………………………1pc
2. Wrench…………………………………………………………………1pc
3. Vacuum adaptor………………………………………………………..1pc
MAINTENANCE AND REPAIR
Always ensure that the tool is switched OFF and unplugged from the power
supply before making any adjustments or carrying out any maintenance
procedures.
Keep the tool’s air vents unclogged and clean at all times. Using compressed
air may be the most effective cleaning method. Always wear safety goggles
when cleaning tools with compressed air.
Regularly check to see if any dust or foreign matter has entered the grates
near the motor and around the trigger switch. Use a soft brush to remove
accumulated dust.
If the body of the tool needs cleaning, wipe it with a soft cloth.
CAUTION: Water must never come into contact with the tool.
WARNING: Do not let brake fluids, gasoline, petroleum-based products,
penetrating oil, etc., come into contact with plastic parts. They contain chemi-
cals that can damage, weaken, or destroy plastic.
WARNING: When servicing, use only identical replacement parts. The use
of any other parts may create a hazard or cause damage to the product.
WARNING: Use only accessories that are recommended for your model by
the manufacturer. Accessories that may be suitable for one tool may become
hazardous when used on another tool.
WARNING: Maintain tools with care. Properly maintained tools work to
their best advantage and are easier to control.
WARNING: Check the power cord before each use. If it is damaged, re-
place it immediately. Never use a tool with a damaged cord.
WARNING: To ensure safety and reliability, all repairs should be performed
by a qualified service technician.