Product Manual

Page 12
INSTALLING THE DUST-EXTRAC-
TION ADAPTORS (FIG. 6)
0
3/64
1/64
FIG. 6a
Dust-extraction
adaptor
Fixed
base
FIG. 6b
Dust-extraction
adaptor
Plunge base
To attach the dust-extraction adaptor onto
the fixed base, insert the dust-extraction
adaptor into the adaptor slot on the back of
the fixed base. Rotate the adaptor until it is
secured on the base; as shown in fig. 6a.
To attach the dust-extraction adaptor onto
the plunge base, position and secure it to
the base with the two screws (included), as
shown in fig. 6b.
HEAVY-DUTY EDGE GUIDE (FIG. 7)
FIG. 7
Lock nut
Edge-guide
adjustment button
The router combo kit comes with a heavy-
duty edge guide. This edge guide can
be used as an aid in routing applications
such as decorative edging, straight-edge
planning and trimming, grooving, dadoing
and slotting.
To attach the edge guide to the fixed or
plunge base, simply insert the edge-guide
rods into the edge-guide mounting slots
either from the left or the right. Adjust the
edge guide to the desired position, and then
secure the edge guide by turning the lock
nuts clockwise.
To adjust the edge guide, with the edge
guide adjustment buttons pressed in, slide
the edge guide.
ASSEMBLY