Product Manual

Page 14
WARNING
Wear heavy gloves
or wind cloth around the blade when you
touch the blade.
1. Stop the machine.
2. Make sure that the blade fully stops.
3. Remove the safety key and battery pack.
4. Turn the machine to its side.
5. Use a piece of wood to prevent the movement
of the blade.
6. Remove the mounting screw with a wrench
or socket.
7. Remove the blade and the fan.
8. Put back the fan.
9. Position a new blade with the cutting edges
toward the ground.
10. Tighten the mounting screw.
STORE THE MACHINE
• Clean the machine before storage.
• Make sure the motor is not hot when you
store the machine.
• Make sure that the machine does not have
loose or damaged parts. If it is necessary,
do these steps/instructions:
• Replace the damaged parts.
• Tighten the bolts.
• Speak to a person at an
approved service
center.
• Store the machine in a dry area.
• Make sure that children cannot come near
the machine.
MAINTENANCE
WARNING
Remove the safety
key and battery pack from the machine be-
fore maintenance.
WARNING
Keep the motor and
battery pack free from grass, leaves or too
much grease.
CAUTION
Use only approved
replacement parts.
CAUTION
Do not let brake
fluids, gasoline, petroleum-based materi-
als touch the plastic parts. Chemicals can
cause damage to the plastic, and make the
plastic unserviceable.
CAUTION
Do not use strong
solvents or detergents on the plastic
housing or components.
GENERAL MAINTENANCE
• Before each use, examine the machine for
damaged, missing, or loose parts such as
screws, nuts, bolts and caps.
• Tighten correctly all the fasteners and
caps.
• Clean the machine with a dry cloth. Do not
use water.
REPLACE THE BLADE
WARNING
Use only approved
replacement blades.
11 .GIF
Wrench
Wood
Fan
Mounting Screw
Blade