Product Manual

Page 7
• Never make any adjustments or repairs
with the motor running.
• Always remove battery pack from mowers
before adjusting, cleaning, or repairing.
• Check grass catcher components and the
discharge guard frequently and replace
with manufacturer’s recommended parts,
when necessary.
• Sharpen a dull blade equally at each end to
maintain the balance.
• Keep guards in place and in working order.
Mower blades are sharp, and can cut. Wrap
the blades or wear gloves, and use extra
caution when servicing.
•
Clean
the blade thoroughly and check its
balance by supporting it horizontally on a
thin nail through its center hole. The nail
should also be in a horizontal position. If
either end of the blade rotates downward,
remove some metal from the heavy or
lower end until the blade is balanced. It is
balanced when neither end drops.
• Use identical replacement blades only.
• Maintain Lawn Mower With Care – Keep
cutting edges sharp and clean for best and
safest
performance. Follow ins
tructions
for lubricating and changing a
ccessories.
Inspect lawn mower cord periodically and if
damaged, have it repaired by an authorized
service facility.
• If situations occur that are not covered in
this manual, use care and good judgment
or contact
• Customer Service for assistance.
• Never operate the mower without proper
guards, plates, or other safety protective
devices in place.
• Use only Masterforce Batteries: BAB728
.
• Use only Masterfo
rce Charger: CAB809.
65
This product contains a chemical known to
the state of California to cause cancer, birth
defects or other reproductive harm. Some dust
created by power sanding, sawing, grinding,
drilling, and other construction activities
contains chemicals known to cause cancer,
birth defects or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cemen
t
and other masonry products;
• Arsenic and chromium from chemically
treated lumber.
Your risk of exposure to these chemicals
varies depending on how often you do this
type of work. To reduce your exposure to these
chemicals, work in a well-ventilated area, and
work with approved safety equipment, such as
out microscopic particles.
SAVE SNOITCURTSNI ESEHT
SAFETY INSTRUCTIONS