Installation Instructions

Page 10
FIG. 2
OPERATION
HOW TO CHARGE THE
BATTERY PACK WITH THE
CHARGER (FIG.2)
A fully discharged battery pack will charge
about 30-60 minutes (depending on battery
type) in the desired surrounding temperature.
1. Charge the battery pack with the correct
charger.
2. Connect the charger to a power supply.
3. Attach the battery pack to the charger
by aligning the raised ribs of the battery
pack with the slot in the charger . Slide
the battery pack onto the charger.
4. The charger will communicate with the
battery pack’s circuitry to evaluate the
condition of the battery pack.
5. During normal charging, the green LED
on the charger will ash continuously,
the green LEDs on the battery pack will
ash one by one from right to left.
6. After charging is complete, the green
LED on the charger will be on, the green
LED on the battery will remain on for
approximately 30 minutes and then turn
off. The power indicator LED lights will
not illuminate when the power indicator
button is pressed while the battery pack
is on the charger.
7. The battery pack will fully charge, but
will not overcharge, if left on the charger.
LED FUNCTIONS OF CHARGER (FIG.3)
LED INDICATOR
BATTERY
PACK
RED
LED
GREEN
LED
ACTION
HI / LO TEMP.
Hot/Cold
battery
On Off
Fast charge will begin
when battery returns to
41°F (5°C) and 122°F
(50°C)
DEFECTI VE
BATTER Y
Defective Flashing Off
Battery pack or
charger is defective
BATTERY
CHARGING
Charging Off Flashing Charging
BATTERY
FULL
Fully
charged
Off On
Charging is
complete
FIG. 3