Use And Care Manual

Page 5
NECESSARY TOOLS REQUIRED
FOR ASSEMBLY
• 10mm socket (for side handle)
• 14mm socket
• Extension ratchet
• Phillips screwdriver
INSTALL PILLARS
Position the pillars over the holes in the
upper part of the cart. Attach each pillar to
the cart with four (4) M6x12 Phillips screws.
Tighten securely.
INSTALL BOTTOM TRAY
Carefully turn the cart upside down and lay
its top on to a protective surface. Position
the bottom tray over the bottoms of the
pillars. Attach the bottom tray to each pillar
with four (4) M6x12 Phillips screws. Tighten
securely.
INSTALL CASTERS
Lay the cart on its side. Insert each
M8x20 hex bolt through a washer, then
through the hole in the caster and into
the bottom of the cart. Each caster
requires four (4) hex bolts and four (4) wash-
ers. Tighten the hex bolts securely.
ASSEMBLY AND OPERATION