Use And Care Manual

Page 11
OPERATION
WRENCH STORAGE (FIG. 5)
Wrench storage is provided on the tool.
Wrench is fully seated when the second lock
detent is engaged.
NOTICE: Wrench needs to be inserted with
the correct orientation. Damage to work
piece could occur if inserted incorrectly.
FIG. 5
Blade Wrench
Base
ELECTRIC BRAKE
The saw has an electric brake to quickly
stop the blade rotation. The electric brake
engages when the trigger switch is released.
When the brake is functioning properly,
sparks may be visible through the vent slots
in the motor housing. This is normal and is
the action of the brake.
BLADE GUARD SYSTEM (FIG. 6)
FIG. 6
Lower blade
guard is in the
up position
when making a
cut.
HOOK (FIG. 3)
Your tool is equipped with a convenient
hook. Use the hook to hang the saw from
a rafter or beam or other similar secure
structure for temporary storage during work.
Recommended lumber size to support the
saw with the hook is 2x4. To use, simply lift
up hook until it snaps into the open position.
When not in use for hanging, always lower
hook until it snaps into the closed position.
VACUUM ADAPTOR (FIG. 4)
Your tool is equipped with a vacuum adaptor
(Ø1-1/4") for connecting a vacuum cleaner.
1. To attach the vacuum adaptor to the
saw, insert it into the slot of the upper
blade guard and then use the screw
(included) to secure it.
2. To remove the vacuum adaptor from
the saw, just loosen the screw on the
vacuum adaptor.
FIG. 4
Vacuum Adaptor
Screw Holes
FIG. 3
Hook
CORRECT
INCORRECT