SAFETY INSTRUCTIONS The purpose of safety symbols is to attract your attention to passivity dangers. The safety rve your careful attention and understanding. ‘The symbol warnings do ot by themselves eliminate any danger. The instructions and wakings they give are no substitutes for proper accidental prevention measures. symbols, and the explanations with thee, t “CAUTION" therefor using this power tel.
SAFETY INSTRUCTIONS before using. Many accidents ae caused by poorly maintained tools. 9, Use ably accessories that are recommended for this ool Accessories that may be suitable for one tool may become hazardous when used on another foal. ELECTRICAL SAFETY warning: Da not permit fingers to touch the terminals of plug when installing or removing the plug from the outset, 1. Double insulated tools are equipped with o polarized plug (one blade s wider han the other).
ool Compatibility Chart . Operates Tool Operates Tool Not Air Tool Continuously intermittently Recommended B All . SAVE THESE INSTRUCTIONS Whig manual contain Important safely and aerating Instruction Head all abstractions and fallow them with 1ie of this product: Paged Important Information This air compressor is ideal for & wide range of finishing applications in wist spaces. The 1.8 gallon design provides optimum pressure.
Assembly Instructions + Unpack the air compressor unit, Inspect the unit for damage. It the unit has been damage, contact the retailer immediately, + Hack the lair compressor's identification labs to ensure that you have purchased the intended model and that it has the required pressure rating for its intended use. Packaging Contents: DESCRIPTION Qry ILLUSTRATION Alr compressor 1 Al filter 1 Q}E}J Coercer's manual q @ Positioning of the air compressor 1.
CLUE RIS Tl I &. Close the tank drain valve (1} Plug-in th power H) 6. Sat the pressure Switch to the DN position and allow the tank pressure fo build, Mo tar will stop whine tank pressure reaches cub-out pressure {Fig I}, Shut down 1. Set the pressures switch (1) o the OFF position. 2. Sphagnum the power cord (2). 3. Reduce the pressure in the tank through e outlet hose. Pulling the safety valve ring {3} and keeping it open Will also reduce the pressure in the tank{fig J). 4.
Troubleshooting The motor will not fun of start The power cord fs not plugged in, Plug the power cord into & grounded outset, The pressure switch is in the © (OFF) position. Set the pressure switch 10 the ON position The extension cord Is the wrong wire gauge or Is too long, Hack extension cord Information (page &) for the proper wire gauge and cord length. Toe miter's thermal overload protection has tripped, Turn the air compressor off, unplug the power cord and wait until the motor has cooed don.
Page 18 1.8 Gallon Quiet Air Compressor WARRANTY 3-YEAR LIMITED WARRANTY This MASTERFORCE™ brand power tonal carries our famous bo Hassle 3-Year Limited Warranty to the original purchaser.