20 Gallon Quiet Air Compressor 207-1504 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference. Toll Free Helpline: 1-888-899-0146 E-Mail: info@altonindustries.
SAFETY SYMBOLS TABLE OF CONTENTS Table Of Contents........................................................................................................................ Page 2 Safety Symbols ............................................................................................................................. Page 3 Safety Instructions ........................................................................................................................
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS WORK AREA SAFETY The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not by themselves eliminate any danger. The instructions and warnings they give are no substitutes for propper accident prevention measures.
SAFETY INSTRUCTIONS before using. Many accidents are caused by poorly maintained tools. 9. Use only accessories that are recommended for this tool. Accessories that may be suitable for one tool may become hazardous when used on another tool. ELECTRICAL SAFETY 1. Avoid body contact with grounded surfaces such as pipes,radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. 2. Do not expose power tools to rain or wet conditions.
Important Information Tool Compatibility Chart This air compressor is ideal for a wide range of jobsite applications. The 20 gallon design provides optimum pressure. It features a 1.8 HP induction motor for quiet operation and oil-free pump for long-lasting,reliable performance. The procedures described in this manual are solely for this 20 gallon air compressor at a maximum pressure of 150 PSI.
Operating Instructions Assembly Instructions Check Safety Valve Unpack the air compressor unit. Inspect the unit for damage. If the unit has been damaged, contact the retailer immediately. Before starting compressor, pull the ring on the safety valve to make sure that the safety valve operates freely. If the valve is stuck or does not operate smoothly, contact a trained service technician(Fig. C).
Maintenance Operating Instructions 4. Close the tank ball valve (1) . Plug-in the power cord(2)(Fig. G) FIG. I ITEM FIG. G Drain the tank 2 OFF 1 OFF 1 ON 5. Set the pressure switch to the ON position and allow the tank pressure to build. Motor will stop when tank pressure reaches cut-out pressure (Fig. H). FIG. H WARNING: Risk of serious eye injury from moisture and debris. Always wear ANSI Z87.1 safety goggles when opening ball valve.
Troubleshooting PROBLEM POSSIBLE CAUSE Troubleshooting SOLUTIONS PROBLEM POSSIBLE CAUSE The power cord is not plugged in. Plug the power cord into a grounded outlet. The pressure switch is in the O (OFF) position. Set the pressure switch to the ON position. The extension cord is the wrong wire gauge or is too long. Check extension cord information (page 6) for the proper wire gauge and cord length. The motor’s thermal overload protection has tripped.
Exploded View Parts List Item# Qty. TARPO1.04.05 Handgrip 1 2 3 4 TATF02.04.06 TQYBZX.50.01 TAVA01.RE.10 Rubber Hose Pressure Guage Pressure Regulator 1 2 1 5 TATF03.03.02 Quick Coupler 2 6 7 CE0207W.00.01 CE0305L.20.01 Knob Control Panel 1 1 8 TATF01.02.19 Bleeding Tube 1 TAVA02.CV.09 TASWPS.00.28 Check Valve Pressure Switch End Cap 12 13 TATF05.03.01 TAPC01.UL.14 TAVA01.SV.01 1 1 1 Power Cord Safety Value 1 1 14 15 16 TARP01.06.02 TATF02.03.08 TATF04.03.
NOTES 20 Gallon Quiet Air Compressor WARRANTY 90-DAY MONEY BACK GUARANTEE: This MASTERFORCE® brand power tool carries our 90-DAY Money Back Guarantee. If you are not completely satisfied with your MASTERFORCE® brand power tool for any reason within ninety (90) days from the date of purchase, return the tool with your original receipt to any MENARDS® retail store, and we will provide you a refund – no questions asked.
© 2019 Menard, Inc.
