80V 1-MAN/2-MAN BRUSHLESS AUGER POWERHEAD 270-1935/270-1936 2900594ME/2900794ME EAB401 OPERATOR’S MANUAL CAUTION To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
TABLE OF CONTENTS Safety Symbols............................................................................................................ Page 2 Safety Instructions....................................................................................................... Page 3 Overview...................................................................................................................... Page 7 Specifications......................................................................................
SAFETY SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract our attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not by themselves eliminate any danger. The instructions and warnings they give are no substitutes for propper accident prevention measures.
SAFETY INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS READ ALL INSTRUCTIONS BEFORE USING (THIS POWER TOOL) WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your battery-operated (cordless) power tool.
SAFETY INSTRUCTIONS If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust related hazards. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second. POWER TOOL USE AND CARE Do not force the power tool.
SAFETY INSTRUCTIONS SERVICE Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers. Name and address of the manufacturer: -- Name: Globe (Jiangsu) CO.,LTD -- Address: No.
OVERVIEW Battery Release Button Safety Lock-Out Switch Powerhead Ring Pin Forward/Reverse Switch Trigger Bit (sold separately) SPECIFICATIONS Type Motor Cordless, battery operated SPECIFICATIONS 80V Weight (Without Battery) 18.63 lbs (8.
ASSEMBLY UNPACKING • Carefully remove the product and any accessories from the box. Make sure that all items listed in the package contents section are included. • Inspect the product carefully to make sure no breakage or damage occurred during shipping. • Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. • If any parts are damaged or missing, please call 1-844-MSTR4CE (844-678-7423) for assistance. • Open the ring pin.
ASSEMBLY THE BATTERY PACK WARNING F o l l o w t h e s e instructions in order to avoid injury and to reduce the risk of electric shock or fire: • Replace the battery pack or the charger immediately if the battery case or charger cord is damaged. • Verify that the trigger is in the OFF position before inserting or removing the battery pack. • Verify that the battery pack is removed and the trigger is in the OFF position before inspecting, adjusting, or performing maintenance on any part of the machine.
OPERATION STARTING / STOPING THE MACHINE To start 1. Press the safety lock-out switch. 2. Squeeze the trigger to start the machine. To stop 1. Release the trigger to stop the machine. FIG. 4 Safety Lock-Out Switch Trigger NOTE: This power head has three lights along the bottom of the powerhead around the shaft. When the trigger is depressed, the lights turn on. If you release the trigger fully, the lights will turn off after 30 seconds. NOTE: keep powerhead clear of water.
MAINTENANCE CLEAN THE MACHINE • Clear the unwanted material out of the air vent with a vacuum cleaner. • Do not spray the air vent or put the air vent in solvents. • Clean the housing and the plastic components with a moist and soft cloth. FIG. 7 CAUTION Do not let brake fluids, gasoline, petroleum-based materials touch the plastic parts. Chemicals can cause damage to the plastic, and make the plastic unserviceable.
EXPLOPDED VIEW No. Part No.
NOTES Page 13
80V 1-MAN/2-MAN BRUSHLESS AUGER POWERHEAD WARRANTY 4-YEAR LIMITED WARRANTY This MASTERFORCE™ brand power tool carries our famous No Hassle 4-Year Limited Warranty to the original purchaser. If, during normal use, this MASTERFORCE™ power tool breaks or fails due to a defect in material or workmanship within four (4) years from the date of original purchase, simply bring the tool with the original sales receipt back to your nearest MENARDS® retail store.
© 2020 Menard, Inc.
