Use And Care Manual

Page 9
3. Pull forward on the battery pack to
remove it from the drill/driver.
TRIGGER SWITCH (FIG. 3)
To turn the Drill/Driver ON, depress the
trigger switch.
To turn it OFF, release the trigger switch.
VARIABLE SPEED (FIG. 3)
The variable-speed trigger switch delivers
higher speed with increased trigger pressure
and lower speed with decreased trigger
pressure.
DIRECTION-OF-ROTATION
SELECTOR (FORWARD/
CENTER-LOCK/REVERSE) (FIG. 4)
OPERATION
TO ATTACH BATTERY PACK
(FIG. 2)
CAUTION:
Avoid the possibility of
accidental starting. Always take care not
to activate the trigger switch when you are
attaching the battery pack or performing
other adjustments to the tool.
1. Place the direction-of-rotation selector
in the center (locked) position.
2. Align the raised portion on the battery
pack with the grooves on the bottom of
the drill/driver, and then slide the battery
pack onto the drill/driver as shown.
3. Make sure that the latch on the battery
pack snaps into place and the battery
pack is secured to the drill/driver before
beginning operation.
NOTICE: When placing the battery pack
on the tool, be sure that the raised rib on
battery pack aligns with the groove on the
drill/driver and the latches snap into place
properly. Improper assembly of the bat-
tery pack can cause damage to internal
components.
TO DETACH BATTERY PACK
1. Place the direction-of-rotation selector
in the center (locked) position.
2. Press the battery-release button to
release the battery pack.
FIG. 2
ATTACH
DETACH
FIG. 3
Variable
Speed
Trigger
Switch
Direction-
of-Rotation
Selector
FIG. 4
Forward Reverse