Use And Care Manual

Page 18
MAINTENANCE
MAINTENANCE
1. Inspect the circular saw, the lock-
off button, trigger switch and the
accessories for damage.
2. Check for damaged, missing, or worn
parts.
3. Check for loose screws, misalignment
or binding of moving parts, or any other
condition that may affect the operation.
4. If abnormal vibration or noise occurs,
turn the tool off immediately and have
the problem corrected before further
use.
5. Detach the battery pack before cleaning
or performing any maintenance. Using
compressed air may be the most
effective cleaning method. Always wear
safety goggles when cleaning tools
using compressed air.
WARNING:
• Always wear safety goggles or safety
glasses with side shields during power
tool operations, or when blowing
dust. If operation is dusty, also wear
a dust mask.
• Do not at any time let brake fluids,
gasoline, petroleum-based products,
penetrating oils, etc. come in contact
with plastic parts. Chemicals can
damage, weaken or destroy plastic,
which may result in serious personal
injury.
• When servicing, use only identical
replacement parts. The use of any
other parts may create a hazard or
cause damage to the product.
• Use only accessories that are
recommended for this circular saw
by the manufacturer. Accessories
that may be suitable for one tool may
become hazardous when used with
another tool.
• Maintain tools with care. Keep cutting
tools sharp and clean. Properly
maintained tools with sharp cutting
edges are less likely to bind, and are
easier to control.
• To ensure safety and reliability, all
repairs should be performed by a
qualified service technician.