Product Manual

Page 9
OPERATION
TRIGGER SWITCH (FIG. 3)
FIG. 3
Variable
Speed
Trigger
Switch
Direction-
of-Rotation
Selector
To turn the Impact Driver ON, depress the
trigger switch.
To turn it OFF, release the trigger switch.
VARIABLE SPEED (FIG. 3)
The variable-speed trigger switch delivers
higher speed with increased trigger pressure
and lower speed with decreased trigger
pressure.
DIRECTION-OF-ROTATION
SELECTOR (FORWARD/CENTER-
LOCK/REVERSE) (FIG. 4)
FIG. 4
Forward
Reverse
The direction of rotation is reversible and
is controlled by a selector located above
the trigger switch. With the Impact Driver
held in normal operating position: Position
the direction-of-rotation selector to the left
of the tool for forward rotation. Postion the
direction-of-rotation selector to the right
of the tool for reverse rotation. Setting the
switch in the OFF (center-lock) position
helps to reduce the possibility of accidental
starting when not in use.
NOTICE: To prevent gear damage, always
allow the Impact Driver to come to a
complete stop before changing the direction
of rotation.
NOTICE: The Impact Driver will not run
unless the direction of the rotation selector
is engaged fully to the left or right.
ELECTRIC BRAKE
To stop the Impact Driver, release the trig-
ger switch and allow the tool to come to a
complete stop. The electric brake
quickly stops rotating. This feature engages
automatically when you release the trigger
switch.