Product Manual

Page 8
ASSEMBLY
CONTENTS
Impact Driver, manual
UNPACKING
1. This product has been shipped
completely assembled.
2. Carefully remove the tool and any
accessories from the box. Make sure that all
items listed in the contents are included.
3. Inspect the tool carefully to make sure
that no breakage or damage occurred
during shipping.
4. Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the tool.
OPERATION
TO ATTACH BATTERY
PACK (FIG. 2)
FIG. 2
ATTACH
DETACH
1. Lock the trigger switch on the impact
driver by placing the direction of rotation
(forward/center-lock/reverse) selector in
center position.
2. Align the raised rib on the battery pack
with the grooves of the driver, and then
attach the battery pack to the driver.
NOTICE: When placing the battery pack on
the tool, be sure that the raised rib on the
battery pack aligns with the groove inside
the driver and that the latches snap into
place properly. Improper attachment of the
battery pack can cause damage to internal
components.
TO DETACH BATTERY
PACK (FIG. 2)
1. Lock the trigger switch on the impact
driver by placing the direction of rotation
(forward/center lock/reverse) selector in the
center position.
2. Depress the battery release buttons
located on the front of the battery pack to
release the battery pack.
3. Pull the battery pack out and remove it
from the tool.
WARNING:
Battery tools are
always in operating condition. Therefore,
the direction-of-rotation selector should
always be locked when not in use or
carrying at your side.