Use And Care Manual

Page 11
OPERATION
INSTALLING AND REMOVING
THE BELT CLIP (FIG.5)
FIG. 5
Belt clip
Screw
To install the belt clip:
1. Align the rib of the clip with the hole on
the base of the impact driver.
2. Insert the screw (included) and tighten
the screw securely with a screwdriver.
The belt clip can be positioned on either
side of the tool.
To remove the belt clip:
1. Use a screwdriver to loosen the screw
that attaches the belt clip to the impact
driver.
2. Remove the screw and the belt clip.
INSTALLING AND REMOVING
THE BIT HOLDER (FIG.6)
FIG. 6
Bit holder
Screw
To install the bit holder:
1. Align the rib of the bit holder the hole on
the base of the impact driver.
2. Insert the screw (included) and tighten
the screw securely with a screwdriver.
The bit holder can be positioned on
either side of the tool.
To remove the bit holder:
1. Use a screwdriver to loosen the screw
that attaches the bit holder to the
impact driver.
2. Remove the screw and the bit holder