Use And Care Manual

Page 7
OPERATION
TO ATTACH BATTERY PACK
(FIG.2)
FIG. 2
Battery-release
button
Align the raised ribs on the battery pack with
the grooves of the power source, and then
attach the battery pack to the power source.
NOTICE: Make sure that the latch on the
battery pack snaps into place and the
battery pack is secured to the power
source before beginning operation.
Improper assembly of the battery
pack can cause damage to internal
components.
TO DETACH BATTERY PACK
(FIG.2)
1. Depress both battery-release buttons,
located on the sides of the battery pack, to
release the battery pack.
2. Pull the battery pack out and remove it
from the power source.
USING THE USB PORT (FIG. 3)
The 5V DC USB port can be used to charge
or power a cell phone or other personal
electronic device that uses less than 5V,
1.5A of DC electric current. If the appliance
draws more than the rated output of the
port, the power source will shut off to protect
the battery pack. To restart the power port,
remove and reinstall the battery pack.
Use only appliances rated within the output
specifications for the USB port.
FIG. 3