OSCILLATING MULTI-TOOL 241-0493 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference. For questions / comments, technical assistance or repair parts – Please Call Toll Free: 1-866-917-4374 (M-F 8:30am-5:00pm EST).
TABLE OF CONTENTS Safety Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3 Overview/Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SAFETY SYMBOLS Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
SAFETY INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. WORK AREA SAFETY 1.
SAFETY INSTRUCTIONS 5. 6. 7. 8. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
SAFETY INSTRUCTIONS 4. 5. 6. 7. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 1. To reduce the risk of electric shock or damage to the chargers and batteries, use only with the MASTERFORCE® FLEXPOWER® battery packs and chargers listed. Battery pack Charger 252-8029 (1.5Ah) 252-8031 (2.0Ah) 252-8030 (2.5Ah) 252-8034 (4.0Ah) 252-8035 (5.0Ah) 252-8027 (7.5Ah) 252-8003 (2.5Ah Boost) 252-8007 (7.5Ah Boost) 252-8025 252-8037 252-8026 2.
OVERVIEW Quick-Release Lever On/Off Switch Variable-Speed Dial LED Worklight Flange Bolt Accessory Plate SPECIFICATIONS Rated Voltage 20 V d.c. Maximum Oscillation Rate 11,000~18,000OPM Oscillation Angle ±1.
ASSEMBLY CONTENTS WARNING: If any part is broken or missing, DO NOT attach the battery pack or operate the tool until the broken or missing part is replaced. Failure to do so could result in possibly serious injury. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious injury.
OPERATION ON/OFF SWITCH (FIG.2) FIG. 2 On/Off Switch VARIABLE-SPEED DIAL (FIG.4) FIG. 4 Variable - Speed Dial 1. 2. To turn the tool on, push the on/off switch forward. To turn the tool off, pull the on/off switch backward. LED WORKLIGHT (FIG.3) FIG. 3 The variable-speed feature on this multitool allows you to match the proper speed to the material being cut, sawed, scraped, or sanded, thereby enhancing the overall performance of your tool and helping to save the accessory from undue wear.
OPERATION SELECTING THE ACCESSORY ACCESSORY HCS wood plunge-cut blade Compatible brands of accessories MATERIAL Wood, plastic, drywall, and other materials Rockwell® Sonicrafter, Dremel®, Bosch® starlock, Bosch® OIS, Dewalt®, Ridgid®, Skil®, Kobalt®, Masterforce®, Performax®, Imperial One Fit INSTALL THE OPEN-LOOP ACCESSORY (FIG.5) FIG. 5c FIG. 5a 1. 2. FIG. 5b 3. Page 11 Flange Bolt Accessory Plate Quick-Release Lever Quick-Release Lever APPLICATION 4.
OPERATION REMOVE THE OPEN-LOOP ACCESSORY FIG. 5d 3. 4. Put the closed-loop accessory on the accessory plate, insert the flange bolt into the hole, and then lock the flange bolt. Turn the quick-release lever back. CUTTING Saw blades are ideal for making precise cuts in tight areas, close to edges or flush to a surface. 1. Select a medium to high speed for making the initial plunge. 2. Start at medium speed for increased control. 3. After making your initial cut, you may increase speed for faster cutting.
MAINTENANCE The tool may be cleaned most effectively with compressed dry air. Always wear safety goggles when cleaning tools with compressed air. Before each use: • Inspect the cordless tool and the trigger switch for damage. • Check for damaged, missing, or worn parts. • Check for loose screws, misalignment or binding of moving parts, or any other condition that may affect the operation.
OSCILLATING MULTI-TOOL WARRANTY 90-DAY MONEY BACK GUARANTEE: This MASTERFORCE® brand power tool carries our 90-DAY Money Back Guarantee. If you are not completely satisfied with your MASTERFORCE® brand power tool for any reason within ninety (90) days from the date of purchase, return the tool with your original receipt to any MENARDS® retail store, and we will provide you a refund – no questions asked.
© 2020 Menard, Inc.
