SDS

Report No.: HT20141103CE17
Page 4 of 6 Pages
sprinkler-protected structure with sufficient clearance between walls and battery stacks.
2. Keep the sample in the cool, dry and well-ventilated place(temperature:-20~30degree C humidity:45~85%). Do
not exposure to direct sunlight for long periods. Keep away from fire and heating sources. Don’t keep the samples
with oxidizer and acid.
3. charge the battery every 6 months to the amount specified by the manufacture, even if the battery is not used.
4. Equip with relevant types and quantities of the extinguishment instruments. The storage place should be equipped
with suitable shelter materials for divulgence handling.
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Control:
Keep away from heat and open flame. Supply with sufficient partial air exhaust. Store in a cool, dry place.
Respiratory Protection:
Not necessary under conditions of normal use. Wear self-contained breathing filter mask if the density exceed in the
air. Wear breathing apparatus under the condition of emergency rescue or evacuation.
Eyes Protection:
Not necessary under conditions of normal use. Wear protective glasses if handling a leaking or ruptured battery.
Skin and Body Protection:
Not necessary under conditions of normal use. Wear fireproofing, gas defense clothes in case of handling a leaking
or ruptured battery.
Hands Protection:
Not necessary under conditions of normal use. Wear chemical resistant rubber .
Other Protections:
No smoking, dining and drinking water in the workplace. Keep good habit of hygiene.
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
black Physical
state:
solid.
Form:
prismatic
Odor:
Odorless
Solubility:
Insoluble in water.
SECTION 10 – STABILITY AND REACTIVITY
Stability:
Stable under normal temperature and pressure.
Distribution of Ban:
Strong oxidizer, strong acid and corrosives
Conditions to Avoid:
Fire source, heating source, disassemble, external short circuit, crushes, deformation, high temperature above 100℃,
direct sunlight and high humidity, immerse in water or overcharge.
Hazardous Polymerization:
Will not occur.