Low Profile Vise 243-1493, 243-1494 243-1495, 243-1496 OPERATOR’S MANUAL © 2018 Menard, Inc., Eau Claire, WI 54703 05/23/2018 CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
TABLE OF CONTENTS Save this Manual.............................................................................. Safety Instructions............................................................................ Assembling the Handle.................................................................... Mounting the Vise............................................................................. Operation.......................................................................................... Parts List........
NOTES SAVE THIS MANUAL Reference this manual for all safety warnings and precautions, operating and maintenance procedures, parts list and diagrams. Keep your invoice with this manual and write your invoice number on the inside of the front cover. Keep the manual and invoice in a safe, dry place for future reference. WARNING: Be sure to read and understand all safety instructions in this manual, including all safety alert symbols such as "danger'', "warning", and "caution", before using this vise.
15. Carefully check for damaged parts or any other conditions that may affect operation before using this product. Repair or replace damaged and worn components immediately. NOTES 16. When servicing, use only identical, manufacturer-recommended replacement parts. 17. Maintain product with care. Keep this product clean and dry, and all moving parts lightly lubricated for better performance. Keep the handle dry, clean and free from oil, grease, and solvents. 18. Use the right tool for the job.
MAINTENANCE 1. Avoid using solvents when cleaning. 2. Most items are susceptible to damage from various types of commercial solvents. 3. Use clean cloths to remove dirt, dust, oil, grease, etc. 7. Align bolt mounting holes with drilled holes then attach the Posi-Clock Disc (8) to your surface using attaching screws (not included) being sure not to overtighten. All five mounting points should have mounting hardware applied. 8.
PARTS LIST PART # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 DESCRIPTION FIG 3 QTY Cast Body Portion A Cast Body Portion B Ratcheting Handle SPEEDJAW™ Release Button Swivel Base Lock Swivel Base Latch Serrated Jaws Posi-Clock Disc Cast Body Attachment Screw Selector Switch Acme Screw Large Vise Bolts Ratchet Handle Screw Swivel Base Casting Cast Body Support Rods Ratcheting Handle Gear 1 pcs 1 pcs 1 pcs 1 pcs 2 pcs 1 pcs 2 pcs 1 pcs 4 pcs 1 pcs 1 pcs 2 pcs 1 pcs 1 pcs 2 pcs 1 pcs 4 3 5 2 15 7 1 8 6
