Use And Care Manual

Page 11
OPERATION
KEYLESS CHUCK (FIG. 7)
The arrows on the chuck indicate the
direction of rotation of the body of the chuck
to: GRIP (tighten) or OPEN (release) the jaws
of the chuck on the drill bit.
BIT STORAGE (FIG. 8)
When no in use, the bit may be stored in the
bit storage.
TWO-SPEED GEAR BOX (FIG. 9)
This drill/driver features a two-speed
gearbox that is designed for drilling or
driving at LO speed or HI speed. A slide
switch is located on the top of the cordless
drill/driver to select either LO or HI speed.
When using the cordless drill/driver in the
LO speed range, the speed will decrease
and the cordless drill/driver will have more
power and torque.
When using the cordless drill/driver in the
HI speed range, the speed will increase and
the cordless drill/driver will have less power
and torque.
Use LO speed for high power and torque
applications, and use HI speed for fast
drilling applications.
NOTICE: Do not change between LO speed
and HI speed while the tool is running.
Failure to obey this caution could result in
serious damage to the cordless drill.
17 19 21 23
FIG. 7
Keyless
Chuck
Grip
Release
FIG. 8
Bit storage
1 3 5 1 3 5
FIG. 9
Slide Switch