Use And Care Manual

Page 8
OPERATION
TO ATTACH BATTERY PACK
(FIG. 2)
FIG. 2
1. Align the raised portion on the battery
pack with the grooves on the bottom
of the worklight, and then attach the
battery pack to the worklight as shown.
2. Make sure that the latch on the battery
pack snaps into place and the battery
pack is secured to the worklight before
beginning operation.
TO DETACH BATTERY PACK
(FIG. 2)
1. Press the latch located on the front of
the battery pack to release the battery
pack.
2. Pull forward on the battery pack to
remove it from the worklight.
ADJUSTING THE WORKLIGHT
HANDLE AND HEAD
(FIGS. 3-4)
Handle adjusts 130°
PUSH
PUSH
FIG. 3
Head adjusts 90°
Pivot-release button
PUSH
PUSH
FIG. 4
The worklight head and handle pivot
independently for maximum exibility. The
handle can pivot 130° and has three positive
stops. The head pivots 90°.
1. Press the pivot-release button and
move the handle to any of the three
positive stops. Do not force the handle
beyond the 130° range.
2. Move the head by manually rotating it
into any position within the 90°. Do not
force the head beyond the 90° range.