SDS

Material Safety Data Sheet
Item : Ad-Tech 961
Revision: B
Date: 02/10/2010
8.EXPOSURE CONTROLS, PERSONAL PROTECTION
9. PHYSICAL AND CHEMICAL PROPERTIES
10. STABILITY AND REACTIVITY
11. TOXICOLOGICAL INFORMATION
12. ECOLOGICAL INFORMATION
Respiratory Protection:
Under normal use conditions, airborne exposures are not expected to be significant enough
to respiratory protection.
Eyes protection:
Avoid eye contact. The following eye protection(s) are recommended: Safety Glasses with
side shields, Indirect Vented Goggles.
Skin protection:
Avoid skin contact. Wear appropriate gloves, such as Nomex, when handling this material
to prevent thermal burns.
Ventilation: Use in well-ventilated area.
Odor: Odorless or resin odor
Volatile Organic Compound :
(EPA Method 24)
No applicable
Appearance:
Brown in color,
Specific Gravity (H
2
O=1):
0.92-0.98
Stability: Stable
Soften Point:
89 ± 5 ℃ Viscosity(350℉)：
12,400 - 16,500cps
PH: No applicable Flash point: Over 200°C
Solubility in Water: Negligible
Evaporation Rate
(BuAc = 1):
Not applicable
Hazardous Polymerization: Hazardous polymerization will not occur.
Incompatibility: None known.
Conditions to Avoid: Strong oxidizing agents.
Hazardous Decomposition
Products:
Flammable Hydrocarbon, carbon monoxide and fumes.
INHALATION：Low hazard for usual industrial handling by trained personnel .
SKIN CONTACT：Frequent or prolonged contact may cause mild skin discomfort. Molten Material may cause
thermal burns.
EYE CONTACT：Low hazard for usual industrial handling by trained personnel.
INGESTION：Minimal toxicity.
ECOTOXICOLOGICAL INFORMATION: Not determined.
CHEMICAL FATE INFORMATION: Not determined.