0 Gallon Jobsite Air Tank 207-1501 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference. Toll Free Helpline: 1-888-899-0146 E-Mail: info@altonindustries.
TABLE OF CONTENTS Table Of Contents..................................................................................................................... 2 Safety Information.................................................................................................................... 2-3 Overview.................................................................................................................................... 4 Operating Instructions.....................................................
SAFETY INFORMATION Before Operating 1. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. 2. Before operating your Air Tank, check for damaged parts. 3. Do not exceed the maximum PSI air pressure. 4. Use compressed air only. 5. Do not over inflate. Never exceed the maximum pressure rating of any inflatable. Check pressure frequently during inflation. 6.
OVERVIEW Safety Valve Handle Grip Tool Gauge ¼” Industrial Style Quick Plug (1pcs) ¼” Universal Style Quick Coupler (4pcs) Pressure Regulator Tank Gauge Air Cock (4pcs) Tank Drain Valve Foot pad(4pcs) Product Specifications 207-1501 10 U.S.Gallons (38L) 225PSI 40.8 lbs (18.5kg) ITEM# TANK SIZE(TOTAL) MAXIMUM PRESSURE WEIGHT • This product has been shipped completely assembled.When unpacking inspect the air tank carefully to make sure no breakage or damage occured during shipping.
OPERATION INSTRUCTIONS 1. To check the safety valve Before using this tank, pull the ring on the safety valve to make sure that the safety valve operates smoothly (Fig 1). Do not use air tank if the safety valve is stuck or does not operate smoothly. Safety Valve Fig 1 WARNING: Risk of bursting. If the safety valve does not work properly, over-pressurization may occur, causing air tank rupture or an explosion. 2.
OPERATION INSTRUCTIONS WARNING: Before connecting the air hose to the tank , make sure that the pressure in the tank is 90 PSI and below (Fig 3). 1. Connecting (1) Close the air cock (Fig 2). (2) Connect the compressor by connecting the air hose to the quick plug of the tank. (3) Connect to the application by connecting the air hose to the tank's quick couplers. (Fig 3) (4) Slowly open the air cocks.
OPERATION INSTRUCTIONS 2. Adjustment of outlet pressure Only one outlet's pressure is regulated (see fig 4). Adjust the outlet pressure to the required level by turning the knob of the pressure regulator clockwise to increase the outlet pressure and counter clockwise to decrease it. Tool gauge is provided to show when the required pressure is reached. When adjusting the pressure, check and make sure that tank gauge for the tank has the pressure level that is higher than that of the pressure to be adjusted.
MAINTENANCE Procedure for draining condensation from tank: 1. Regularly drain water condensation from tank, which can lead to internal corrosion and damage to the tank. To drain, keep all air cocks to the "OFF" position (Fig 5). 2. Turn air pressure regulator knob counter-clockwise to set the outlet pressure to zero (Fig 5). 3. Place suitable container under unit to catch water. 4. Slightly tilt unit and turn drain valve counter-clockwise to open (Fig 6). 5.
NOTES 9
Gallon Jobsite Air Tank WARRANTY 90-DAY MONEY BACK GUARANTEE: This MASTERFORCE® brand power tool carries our 90-DAY Money Back Guarantee. If you are not completely satisfied with your MASTERFORCE® brand power tool for any reason within ninety (90) days from the date of purchase, return the tool with your original receipt to any MENARDS® retail store, and we will provide you a refund – no questions asked.
© 2019 Menard, Inc.
