Use And Care Manual

Page 15
MAINTENANCE
WARNING:
TO REDUCE THE
RISK OF INJURY, ALWAYS UNPLUG
THE CHARGER AND REMOVE THE
BATTERY PACK FROM THE CHARGER
OR TOOL BEFORE PERFORMING ANY
MAINTENANCE. NEVER DISASSEMBLE THE
TOOL, BATTERY PACK OR CHARGER.
IMPORTANT!
BEFORE CLEANING
YOUR VACUUM OR CARRYING OUT ANY
MAINTENANCE, MAKE SURE THAT THE
TOOL IS SWITCHED OFF AND POWER
SUPPLY DISCONNECTED TO PREVENT
ACCIDENTAL START-UP.
EMPTYING & CLEANING THE COLLECTION
TANK
1. Verify that the battery has been removed
from the operational battery bay (Fig. 32).
Fig. 32
2. Disconnect the hose from the vacuum.
3. Undo the latches and remove the power
head from the collection tank.
4. Clear all dirt or debris from the collection
tank and clean with mild soap and water.
Allow to dry before replacing the power
head (Fig. 33).
Fig. 33
STORAGE
Before storing your vacuum cleaner, the
collection tank should be emptied and cleaned.
The battery should be stored in the right storage
bay. The accessories should be cleaned and
stored so they can be readily available when
needed. Store wet/dry vacuum indoors.
REPAIRS
Repairs for this wet/dry vacuum should be
performed only by qualified service personnel
using only identical replacement parts.