CORDLESS INFLATOR 207-3667 OPERATOR’S MANUAL CAUTION: To Reduce the Risk of Injury, User Must Read and Understand the Operator’s Manual. Save These Instructions For Future Reference. For questions / comments, technical assistance or repair parts – Please Call Toll Free: 1-866-917-4374 (M-F 8:30am-5:00pm EST).
TABLE OF CONTENTS Safety Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3 Overview/Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SAFETY SYMBOLS Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely. Symbol Name Designation / Explanation V Volts Voltage A Amps Current � PSI Pounds per square inch BAR / kPa Kilopascal or d.c.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
SAFETY INSTRUCTIONS GERNERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and instructions! Failure to follow the warnings and instructions may result in electric shock, fire and / or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. WORK AREA SAFETY 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2.
SAFETY INSTRUCTIONS 6. Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. 7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 8.
SAFETY INSTRUCTIONS 6. Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 100 °C (212 °F) may cause explosion. 7. Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire. SERVICE 1.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 1. To reduce the risk of electric shock or damage to the chargers and batteries, use only with the MASTERFORCE® battery packs and chargers listed. Battery packs Chargers 252-8029 (1.5Ah) 252-8025 252-8031 (2.0Ah) 252-8036 252-8030 (2.5Ah) 252-8037 252-8034 (4.0Ah) 252-8044 252-8035 (5.0Ah) DANGER: People with electronic devices, such as pacemakers, should consult their physician(s) before using this product.
OVERVIEW Mode Button - Button Pressure Gauge Low Pressure Hose + Button Light Switch Power Switch Light Tire Inflator High Pressure Hose Ball Needle Adaptor Low Pressure Air Output Tapered Adaptor Air Intake Presta Valve Adaptor 12VDC Adaptor (inside the bottom) SPECIFICATIONS Rated Voltage 20 V d.c. Maximum pressure 160 PSI Weight 3.56 lbs.
ASSEMBLY WARNING: If any part is broken or missing, DO NOT attach the battery pack or operate the tool until the broken or missing part is replaced. Failure to do so could result in possible serious injury. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious injury.
OPERATION TO USE THE 12VDC ADAPTOR (FIG.2) Remove the adaptor from the bottom of the tool and then insert it into a vehicle’s INFLATING USING HIGH PRESSURE HOSE INFLATING CAR OR BICYCLE TIRES (FIG.4-FIG.5) 12VDC socket. FIG. 4 FIG. 2 Open Lock Lever Tire Inflator 12VDC Adaptor FIG. 5 CAUTION: The inflator can become hot during use. Allow the inflator to cool for ten minutes after each ten minutes of continuous use. Allow inflator to cool for 30 minutes before storing it.
OPERATION b. Presta valve: Remove the tire valve cap. Open the valve tip. Thread the presta valve adaptor on to the valve stem. Move the tire inflator lever straight up and push it over the presta valve adaptor. Move the lever to the locked position. 4. Press the mode button to turn on the pressure gauge. 5. Select the pressure unit by pressing the mode button until the desired unit is displayed (PSI, BAR or kPa). Set the pressure by pressing the “+” or “–” button until the proper pressure is displayed.
OPERATION INFLATING AND DEFLATING USING LOW PRESSURE HOSE LARGE INFLATABLES Low Pressure Air Output FIG. 7 Low Pressure Hose FIG. 8 4. Press the mode button to turn on the pressure gauge. 5. To start inflating/deflating, press the power switch to the low-pressure position (II). 6. To stop inflating/deflating, press the power switch to the off position (O). 7. When finished, remove the hose from the item to be inflated/deflated. 8. Turn off the tool by pressing and holding the mode button.
MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: To avoid serious personal injury, always remove the battery pack or unplug the power from the product when cleaning or performing any maintenance. 1. Before each use, inspect the general condition of the tool.
CORDLESS INFLATOR WARRANTY 90-DAY MONEY BACK GUARANTEE: This MASTERFORCETM brand power tool carries our 90-DAY Money Back Guarantee. If you are not completely satisfied with your MASTERFORCETM brand power tool for any reason within ninety (90) days from the date of purchase, return the tool with your original receipt to any MENARDS® retail store, and we will provide you a refund – no questions asked.
© 2019 Menard, Inc.
