Use And Care Manual

Page 13
WARNING:
When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage.
WARNING:
To avoid serious personal injury, always remove the battery pack or
unplug the power from the product when cleaning or performing any maintenance.
1. Before each use, inspect the general condition of the tool. Check for:
• leaking, swollen, or cracked battery pack
• loose hardware
• misalignment or binding of moving parts
• cracked or broken parts
• any other condition that may affect its safe operation
2. After use, wipe the external surfaces of the tool with a clean cloth.
3. Use a vacuum to clean debris from the air intake and external air vents.
MAINTENANCE
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Tool doesn’t work.
Battery is depleted. Charge the battery.
Battery is overheated.
Cool the battery and restart
the tool again.
The pressure gauge is not
activated.
Press the mode button to
turn on the pressure gauge
and then you can start the
operation.
Tool is overheated.
The tool works
continuously for more
than 10min.
Cool the tool for more than
10min and restart the tool
again.