20,000 Lumen Dual-Head LED Work Light with Tripod 370-5383 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
TABLE OF CONTENTS Safety Symbols ................................................................................ Page 3 Safety Instructions ........................................................................... Page 4,5 Unpacking and Contents ................................................................. Page 5 Overview / Specifications ................................................................ Page 6 Assembly Instructions ......................................................................
SAFETY SYMBOLS Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. This Symbol Designates That This Product Is Listed By The Intertek Testing Services, To United States And The Canadian Standards Association.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract our attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not by themselves eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
SAFETY INSTRUCTIONS WARNING: READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS BEFORE USING THIS PRODUCT. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. CAUTION: RISK OF ELECTRIC SHOCK, Do not use with extension cord near water or where water may accumulate. Keep work light at least 16 feet from pools and spas. Keep plugs and receptacles dry.
OVERVIEW Carrying Handle Lighting Head Side Locking Knob Bracket H-Stand Switch Stand Locking Knob Quick-Release Mounting Clamp Cable Hook Locking Collars Tripod Leg Connector Tripod Leg Twist Locking Collar Extendable Leg FIG. 1 SPECIFICATIONS Page 6 Rated Power 120V~, 60Hz, 200W Brightness 5,000 / 10,000 / 15,000 / 20,000 Lumens Color Temperature 5000K Color Rendering Index > 75 Cable 10 ft. 18/3 SJTOW Tripod Height 31” - 65” Net Weight 19.
ASSEMBLY INSTRUCTIONS WARNING: Check and make sure there is no sign of physical damage to the product when unpacking. Do not use damaged product. D2 SETTING UP AND ADJUSTING THE TRIPOD L2 1. Loosen the tripod locking knob (F). See figure 2. 2. Push down the leg connector (A) until the legs (B) are fully extended and firmly tighten the locking knob (F). 3. Adjust the height of the tripod by releasing the locking levers (L1 & L2) and raising the center poles (D1 & D2) of the tripod.
OPERATION SWITCH ACTION ADJUSTING THE LIGHT DIRECTION Each of the work light heads has a rocker switch located on the back. See figure 1. Each of the work light heads can be tilted vertically up to 30° down or 90° up. Press the switch on the left side marked “I” to turn on the work light at 5,000 lumens. Press the switch on the right side marked “II” to turn on the work light at 10,000 lumens. Turn off the work light by setting the switch in the middle position “O”. See figure 5.
NOTES Page 9
NOTES Page 10
20,000 Lumen Dual-Head LED Work Light with Tripod WARRANTY 90-DAY MONEY BACK GUARANTEE This MASTERFORCE® brand power tool carries our 90-Day Money Back Guarantee. If you are not completely satisfied with your MASTERFORCE® brand power tool for any reason within ninety (90) days from the date of purchase, return the tool with your original receipt to any MENARDS® retail store, and we will provide you a refund - no questions asked.
© 2011 Menard, Inc.
