Installation Instructions

FIG. 5
Page 8
MAINTENANCE
Your work light requires very little care and maintenance.
Simply clean the lens regularly with a non-abrasive
cleaner.
WARNING:
Always make sure the
work light is unplugged and completely cool before
attempting to clean it.
OPERATION
SWITCH ACTION
Each of the work light heads has a rocker switch located
on the back. See figure 1.
Press the switch on the left side marked “I” to turn on
the work light at 5,000 lumens. Press the switch on the
right side marked “II” to turn on the work light at 10,000
lumens. Turn off the work light by setting the switch in
the middle position “O”. See figure 5.
Always turn the work light off before unplugging.
ADJUSTING THE LIGHT DIRECTION
Each of the work light heads can be tilted vertically up to
30° down or 90° up.
To Adjust the Light Direction, loosen the side locking
knobs. Adjust the work light head to desired position,
and retighten knobs.