Use And Care Manual

SPECIFICATIONS

Page 8

BENCH DRILL PRESS WITH LASER LINE

MODEL NO.:

MOTOR:

POWER:

SPEED:

SWING:

SPINDLE TAPER:

CHUCK CAPACITY:

QUILL DIAMETER:

STROKE:

CAPACITY:

TABLE TILT:

LASER:

WEIGHT:

RDM1603BNV

120V 60 Hz

550W, 4.6Amp

530-3100RPM

12" (305mm)

JT3

1/8–5/8" (3–16 mm)

2 3/5" (65 mm)

3 1/8" (80 mm)

6" (152 mm) (chuck to column)

19 1/2" (495 mm) (chuck to base)

0 to 45° left and right

Class III, transformer powered

77.8 lb (35 kg)

ASSEMBLY AND ADJUSTMENTS

UNPACKING AND CLEANING

Unpack the bench drill press and all its parts, and compare against the list below. Do not discard the

carton or any packaging until the bench drill press is completely assembled.

To protect the bench drill press from moisture, a protective coating has been applied to the machined

surfaces. Remove this coating with a soft cloth moistened with kerosene. Do not use acetone, gasoline,

or lacquer thinner to clean. Apply a coat of paste wax to the table and column. Wipe all parts with a clean,

dry cloth.

FIG.2