Product Manual

Page 9
OPERATING INSTRUCTIONS
Make sure to operate the safety lock button (J)
to lock the trigger.
Turn on water supply at the faucet (FIG.9) or
fill the water tank with enough water in order
to fully cover the water filter (FIG.10).
Squeeze triggers (K) and (L) water trigger to
begin pressure washing.
Release them to stop the power cleaner.
Allow the device to come to a complete stop
before squeezing them again.
The power cleaner has two power settings.
To swap from one to the other double click
quickly the power trigger (k) within 0,8
seconds.
Push the safety lock button (J) to unlock the
trigger (K). Point the power cleaner in a safe
direction, squeeze the trigger (K) to start the
power cleaner and push the water trigger (L)
to intake water until there is a steady stream
of water. Keep the power cleaner working
until all air is drained from the suction hose.
FIG.9
C
C
Un-lock
Lock
J
FIG.11
Water
Power
0.8 sec
L
K
K
C
FIG.12
FIG.10
WARNING
:
The maximun suction
height of the power cleaner from a water tank
is 1 meter / 3,2 feet.
95790_IM_ MFMJ250.indd 9 2020/4/13 下午2:19