Installation Instructions

FIG. 4
FIG. 6
FIG. 7
FIG. 5
Locking Button
180°
330°
Page 8
MAINTENANCE
Your work light requires very little care and maintenance.
Simply clean the lens regularly with a non-abrasive
cleaner.
WARNING:
Always make sure the
work light is unplugged and completely cool before
attempting to clean it.
OPERATION
ADJUSTING THE LIGHT PANELS
Your light has four adjustable light panels. They can be
configured in dozens of ways to get light where it is
needed.
Flipping the Light panels: Place the locking button in
Unlock
position. Flip the light panels on each side
up or down to the desired position. Lock the light heads
by placing the locking button at Lock
position. See
figures 4 & 5.
Rotating the Light Heads: The light panels are able to
rotate 330° around their center axis. See figure 6.
CAUTION:
Do not force the light
panels. If it stops rotating in one direction, try the
other direction to reach the desired position.
ACCESSORIES
Foot Spike
Three foot spikes are included for extra hold in tough
conditions. Hammer the foot spike into soft ground
though two holes on the foot to give the light extra
stability. The foot spike can be stored on the leg as
shown in figure 7.
Shoulder Strap
An adjustable shoulder strap is included for easy
transport.