Manualshelf

Assembly Instructions

ManualsBrandsMasterforce ManualsPower Tool AccessoriesUniversal Folding Miter Saw Stand
78910111213141516
-
-
ASSEMBLY INSTRUCTIONS
TO REMOVE SAW FROM STAND
Figure 12
1. Raise the locking levers to unlock the saw and tool mounts.
2. Unsnap the J-Lock
™
clips from around the mounting beams to allow your tool to separate
from your MASTERFORCE
®
Miter Saw Workstation.
3. Lift away from the rear rail of the stand to disengage.
4. With the assembly tilted slightly toward you, lift the assembly to disengage from the front
rail of the Miter Saw Workstation.
FIG 12
TRANSPORTING AND STORING
Figure 13
1. Before storing or transporting, make sure all attachments are secure and bench top
tool is removed.
2. Collapse legs and make sure they are locked into the up position.
3. Use the (9) handle that is located on the end of the product for transporting.
4. Pull up on the handle and tilt Miter Saw Workstation until weight is distributed evenly
onto wheels.
FIG 13
Page 12