Manualshelf

Assembly Instructions

ManualsBrandsMasterforce ManualsPower Tool AccessoriesUniversal Folding Miter Saw Stand with Wheels
12345678910
-
ASSEMBLY INSTRUCTIONS
ATTACHING THE PULL HANDLE
Figure 3
1. Place one (18) spring washer and one (17) M8 washer onto (19) M8*20 bolt.
2. Place (19) M8*20 bolt through the back of the holes in the body as shown in Figure 3.
3. Place one (15) M8 nut into the square slot on the bottom of the handle.
4. Pass the bolt through the handle and use one hand to hold the handle and nut into position
and the other hand to tighten the bolt.
5. Repeat steps 1-4 for the other side of the handle.
6. Ensure bolts are tightened.
FIG 3
Handle
Nut M8
M8*20 Bolt
Flat Washer
Spring Washer
Page 6