Use And Care Manual

Page 10
OPERATION
ADJUSTING THE VOLUME
When the radio is turned ON, it will initially
return to the last volume setting used.
NOTICE: If both 18/20V battery pack and
AAA batteries are removed from the radio
or have no charge, the radio will return to
the default volume setting.
To increase the volume: Press the VOL+
button.
To decrease the volume: Press the VOL-
button.
To change volume quickly, hold the VOL+ or
VOL- button.
EQ ADJUSTMENT
To increase the bass sound, press the
BASS/CLOCK button and quickly release it.
To go back to the balance setting press the
BASS/CLOCK button and quickly release it
again.
MODE SELECTION
To switch modes, press the MODE/SCAN
button and quickly release it. The selected
mode will be shown in the digital display.
There are four modes:
• FM mode
• AM mode
• AUX mode
• BLUETOOTH mode
NOTICE: When turned on, the radio will
return to the last mode that was used,
unless both AAA batteries and 18/20V
battery pack are removed or lose charge.
CHANGING CHANNELS
The buttons are used to manually tune
to the desired radio frequency. The selected
frequency is displayed on the digital display.
To use tune feature:
1. Press the or button and quickly
release to manually scroll through radio
channels one frequency at a time.
To use seek feature:
1. Press and hold the button for three
seconds to tune to the next lowest
frequency with clear reception.
2. Press and hold the button for three
seconds to tune to the next highest
frequency with clear reception.
To use scan feature:
1. Press and hold the MODE/SCAN button
for three seconds to seek through the band.
2. The scanning will pause when each
channel is found and all channels will
be saved automatically in the memory.
3. Press the or button to stop scanning
To use the FM antenna:
Raise or lower radio antenna until the radio
channel can be heard clearly.