Use And Care Manual
Page 11
OPERATION
STORING A PRESET IN MEMORY
The memory feature saves up to 40
frequencies as presets in the radio’s
memory. You can save 20 frequencies in FM
mode and 20 in AM mode.
To store a frequency in memory:
1. Tune to the frequency you want to save.
2. Press and hold the button. A
memory location number will blink on
and off.
3. Press the or button to select a
memory location.
4. Press the button and quickly
release it to store the frequency in the
selected memory location.
To recall a preset frequency:
1. Press the button and quickly
release it to cycle through the stored
frequencies.
SETTING THE CLOCK
The time is always displayed when the radio
is turned off and in AUX mode.
NOTICE: If both AAA batteries and
18/20V battery pack are removed
or lose their charge, the clock set-
tings will be lost. Settings are not
affected by the removal of only the 18/20V
battery pack.
To set the clock:
1. Press and hold the BASS/CLOCK
button. The number representing the
hours will blink on and off.
NOTICE: If you do not press a button
within 10 seconds, the clock programming
feature will automatically return to the
previous setting.
2. Press the or button to set the hour.
For AM/PM settings, scroll through
the first 12 numbers until AM/PM is
displayed.
3. Press the BASS/CLOCK button quickly.
The number representing the minutes
will blink on and off.
4. Press the or button to set the
minutes.
5. Press the BASS/CLOCK button again to
save.
USING MEDIA PLAYER
1. Select AUX mode. Refer to MODE
SELECTION.
2. The RETAINER STRAP may be used to
secure the media player into position.
3. Connect the integrated auxiliary cable
to the media player .
4. The media player must be ON and
in PLAY mode for sound to be heard
through the speaker.
5. All media player controls can be used
normally while connected to the radio.
NOTICE: Volume for any device connected
through the auxiliary connector can be
adjusted using the volume control for that
device or with the VOL+ or VOL- buttons
on the radio.
• Turning the radio OFF will NOT turn the
media player OFF.
NOTICE: The integrated auxiliary cable
DOES NOT provide a charging function for
auxiliary devices.
CHARGING/POWERING
A USB DEVICE
The USB Output POWER PORT charges/
powers most devices that can accept power
through a USB connection.