Use And Care Manual

Page 6
Do not attempt to use this product until you thoroughly read and completely
understand the instruction manual. Pay close attention to the safety rule, includ-
ing Danger, Warnings, and Cautions.
The operation of any tool can result in foreign objects being thrown into your
eyes, which can result in severe eye damage. Before beginning any operation,
always wear safety goggles or safety glasses with side shields and a full face
shield when needed. We recommend the Wide Vision Safety Mask for use over
your eyeglasses or standard safety glasses with side shields. Always wear eye
protection that complies with ANSI Z87.1.
WARNING
WARNING
GENERAL USE STATEMENT (APPLICATIONS)
Sku: 241-0811
Voltage 120V~60Hz
Power Input 8.5A
No-load speed 790-1150/min
Belt size 3˝ * 21˝
Sanding size 3˝*5˝
Protection class
/II
Machine weight 7.48 lbs
We recommend that you purchase your accessories listed in the above list only from Menards store
that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist
you and offer advice.
1pc Dust bag
1pc Vacuum port 1-1/4” & 2-1/2”
1pc 80 grit sanding belt