Product Manual

This hose system comes with five adaptors to fit different vacuum
inlet connections. Four of the adaptors are made to lock the hose
to the vac inlet and one is a non-locking friction fit. To fit the
adaptor to the vacuum port:
1. Check the adaptors to see which one has the best fit and locks
to the vacuum inlet of your vac. (Figure 1) If none of the
locking adaptors fit, use the non-locking adaptor.
Figure 1
2. Once you have identified the proper adaptor, insert the red
locking clip into the channel on the adaptor as illustrated.
(Figure 2)
Figure 2
3. Fit the adaptor with the red clip to the end of the hose and
lock in place. (Figure 3)
Figure 3
240-5259