Use And Care Manual

Page 9
GENERAL ASSEMBLY INSTRUCTIONS
12. Hang the tool caddy on the hooks on the
rear of the vacuum, and apply downward
pressure to snap into place. (fig. 14)
Fig. 14
13. Secure the large end of the hose onto the
vacuum port on the collection tank and
screw into place. (fig.15)
Fig. 15
14. Choose the desired accessories and insert
onto the end of the hose. (fig. 16)
Fig. 16
AIR / NOISE DIFFUSER
To diffuse exhaust air or for quieter operation,
install the air/noise diffuser into the blower port
by turning clockwise to lock into place.
Fig. 17
POLARIZED PLUG
To reduce the risk of electrical shock, this
appliance has a polarized plug (one blade wider
than the other). This plug will fit in a polarized
outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the
proper outlet. Do not change the plug in any
way. Double insulation
eliminates the need
for the three wire grounded power cord and
grounded power supply system.