Use And Care Manual

Page 11
5. Place the power head back on the collection
tank, aligning the top section with the
latches, and lock into place. (fig. 5)
Fig. 5
OPERATING INSTRUCTIONS:
6. Insert the locking end of the hose into the
vacuum port and screw in place. Push the
desired extension wands or attachments
onto the free end of the hose. (fig. 6).
Fig. 6
7. Verify that the switch is in the ‘O’ OFF
position before plugging the power cord into
the outlet. (fig. 7 & 8)
Fig. 7 Fig. 8
8. Turn the motor on by pressing the switch to
the ‘I’ ON position. (fig. 9)
Fig. 9
9. Once you have completed vacuuming,
press the switch to the ‘O’ OFF position and
unplug the power cord from the outlet. (fig.
10 & 11)
Fig. 10 Fig. 11
O = OFF I = ON
10. Empty the collection tank into a suitable
receptacle or drain.
DRY VACUUM OPERATION